Blog
Load a 600kg pallet in a Van? With ONE person!? Co-Mac’s Super Heavy-Duty Drawer Slides come to the rescue!
Stress Test with 800kg of blocks. *We do not recommend you try this, as it will cause premature failure and/or permanent damage to your slides.
Now that is a full load. Held by our 5005 – Super Heavy Duty Drawer Slides, which are rated to a massive 600kg! We decided to stress test with 800kg of blocks. *We do not recommend you try this, as it will cause premature failure and/or permanent damage to your slides.
While these industrial drawer slides might have been up to this short test, we are not sure our vans suspension was! So we took some blocks off. Now with 600kg stacked and within the safe rating limit of these slides, the drawer was so easy to move that Co-Mac Boy could do it single handed! Watch him move it here http:// www.youtube.com/watch? v=epa0eojBB9U
(As you can see he's pretty stoked about this)
What are super heavy duty drawer slides made of?
Our 5005 - Super Heavy Duty Drawer Slide come as a pair and are rated to 600kg. Made from steel with a durable zinc plated finish, the left and right rail can be installed to the width of the drawer you require. At 1500mm long these slides extend 1180mm, or ¾ extension.
How much weight can heavy duty drawer slides hold?
These heavy duty drawer slides can hold 600kgs
How are they able to move so smoothly with 600kg?
The hero of these slides is the heavy duty roller bearings. The 2 bearings per slide (4 total per pair) guide the drawer within the cavity, up to 600kg. These bearings allow the drawer to move smoothly and quietly, even with such heavy loads.
When should I use super heavy duty drawer slides?
If you regularly have to move heavy loads, these industrial sized drawer slides are perfect for a ute deck, truck deck, trailer or even courier van sliding floor. Here they are (painted blue) installed in the canopy of a ute
Where can I find them?
Like all our drawer slides, you will find them in the W section of the website
https://www.comac.co.nz/drawer-slides-super-duty-zinc-plated-600kg
Like this post? Share it with your friends:
Latest Blogs
5931 Beam Clamp Load Testing - Vertical Pull Test | Co-Mac Types of Gate Rollers for U Track: Which One is Right for You? Choosing the Right Hinge for Your Chiller: Rising vs. Non-Rising Hinges Understanding Different Shapes of Seals: A Comprehensive Guide Accelerated Salt Spray Testing of Rust Protection Zinc Paints Top 3 Lock Options for Sliding Doors and Gates Container Door Hardware: A Guide to Container Hinges, Locks and Seals Top Tips for Choosing Durable Sliding Door Hardware in New Zealand's Climate: Your Ultimate Guide Self Closing Gate Hardware In the Community: Picking Daffodils 3 Types of Drop T Latches 2022 Catalogue Coming Soon! How long will Linear Slides last? We tested them past 80,000 cycles - find out how they performed How Long Will a Gas Strut Last? Engineering Forces Explained: Tensile, Compressive, Shear and Torsion Co-Mac Boredom Busters - How We Did It Co-Mac Boredom Busters Is a Double Nut Better than a Single Nut? How much Better? Salt Spray Testing for Corrosion Resistance